New Picture (15).png


~ Course Overview

This five-day nationally recognised training course will provide the theoretical and practical knowledge operate a slewing mobile crane up to 100 tonne capacity. It encompasses the requirement for non-slewing mobile crane licence (CN) and the vehicle loading crane licence (CV).

Successful completion of the training will also allow the participant to apply for a 100 tonne slewing crane high-risk work license, (class C1) from WorkSafe Western Australia (note that there is an additional cost payable directly to WorkSafe WA).

~ Recommended For

Any person who has the requirement to shift loads with a slewing mobile
crane with a lifting capacity under 60 tonnes as part of their day-to-day activities.

~ Pre-requisites

The participant must have a sound knowledge of the English language and basic mathematical concepts. Although it is not a pre-requisite for the obtainment of a C1 license, the participant should ideally possess, or be striving to obtain a suitable truck license (e.g. MR / HR).

~ Learning Outcomes

On successful completion of this training, the participant will be able to:

  • Accurately record and maintain information relating to crane operations
  • Communicate in the workplace with hand signals, whistles and two-way radios
  • Communication effectively with other site personnel
  • Load data into crane computer (where fitted) and check operation to accurately reflect the crane configuration
  • Operate a slewing mobile crane (≤ 100t capacity) for the lifting and moving of loads to the safe working capacity in conjunction with other associated personnel
  • Apply current risk assessment and hazard control strategies to the positioning and safe operation of the crane
  • Use and interpret crane manufacturer's specifications and data, including load charts to enable the crane to be configured for the load
  • Verify problems and equipment faults and demonstrate appropriate response procedures

~ Assessment

Theoretical assessment for this unit comprises a closed book and unassisted written knowledge assessment of approximately 113 questions. The assessment will further include approximately 3 questions on mathematical calculations. There will also be a practical assessment of competency consisting of various load-shifting related tasks. Your assessor will be a qualified WorkSafe WA assessor.

~ Training Staff

All training personnel have many years experience in the construction and mining industry, as well as holding the relevant certification for training and assessing and are committed to providing participants with the best possible training services. Your assessor for this training will be an accredited WorkSafe WA Assessor. Your assessor for this training will also be an accredited WorkSafe WA Assessor, ensuring that you meet the requirements laid down by WorkSafe WA to receive your license for this high-risk work.

~ Location

Training can be conducted on-site Australia wide or at our training centre located at 12 Sparks Road, Henderson, Perth, WA. Training may also be conducted internationally. 

~ Alternative Learning Methods

The preferred method of delivery of this course is intensive, classroom and practical based learning, however alternative methods of delivery are available for this unit. The participant, after enrolling with Coastal Enterprises (WA) Pty Ltd for this course, may undertake workplace (on-the job) training for this course under the supervision and instruction of a "C1" licensed crane operator. With workplace training, assessment will still be required by a Coastal Enterprises (WA) Pty Ltd WorkSafe Assessor to ensure the participant meets the competency standards required for licensing. Recognition of Prior Learning (RPL) is also offered for this unit, and on proof of evidence the course time may be reduced to asssessment time only (1-2 days). Contact our office for more details.

~ Inclusions

All learning materials (including a comprehensive learner guide), consumables & equipment. Tea, coffee and chilled/filtered water are also provided on public courses.

~ Aims

Coastal Enterprises (WA) Pty Ltd, as a Registered Training Organisation, strive to maintain the highest professional standards in the delivery of its competency based and accredited training.

~ Required Resources

  • Hardened-toe Safety Work Boots (MUST be supplied and worn by the participant)
  • Hard Hat
  • High-visibility Clothing
  • Safety Glasses
  • Stationary
  • 100 points of Identification
  • Current WorkSafe License (if previously obtained).
  • A slewing mobile crane (60-100t capacity) will be required for this training. Coastal Enterprises (WA) Pty Ltd currently have a crane which meets this license class on permanent hire at its Henderson training centre. Should training be required on-site, an appropriate crane must either be supplied by the client, or Coastal Entrprises (WA) Pty Ltd can arrange for the hire of an appropriate crane for training and assessment if required. Any costs borne by Coastal Enterprises (WA) Pty Ltd for crane hire will be passed onto the client.

NOTE: Access to the components as listed in the course overview will be required if training is to be conducted on-site.

~ Course Frequency

C1 Slewing Crane courses are held upon request. Contact our office to schedule a C1 Crane course on the details below.

~ Registration

Phone Coastal Enterprises (WA) Pty Ltd on:

Phone: (+61) 08 9437-6688           Fax: (+61) 08 9437-6060 

or email at

You can also complete the following enquiry form:

Enquire About Our Courses

Click all that apply


Click on the link below to download a printable brochure for this course.

shift loads with a vehicle mounted crane with a lifting capacity over 10 metre/tonnes as part of their day-to-day activities. Note: We offer “Duty of Care” training for lesser capacity vehicle cranes.